Recent content by Cfs

  1. C

    Old Briggs made Toro Engine runs too fast

    Thank you all for your in insights. I gave already replaced the primer and the odd shaped gasket that the air filter box attaches to on the outside of the carburetor. I was given this mower from a neighbor who said she picked it up on the side of the road to give to a friend who needed a...
  2. C

    Old Briggs made Toro Engine runs too fast

    I have a Toro super recycler that is from 1999-ish. It’s a Toro model # 20040 SR-210S serial # 9902466.. I have looked up the mower on Toro’s site and it is not identified with a Briggs model # and is referred to as a model GTS200. That said it appears to have been made by Briggs and is an...
  3. C

    Repair or replace leaking hydro pump older Lazer z 60

    Oops meant to say -144 oring. I did get the actual Hydro-Gear o-ring
  4. C

    Repair or replace leaking hydro pump older Lazer z 60

    I picked up a new 51016 square cut -141 O-ring from a local dealer and I waiting for the owner to bring the machine back to attempt the repair. I have never done this repair. It looks tempting to try it without removing the pump from the mower… but would probably be better accessed with the...
  5. C

    Repair or replace leaking hydro pump older Lazer z 60

    I am going to pick up the Hydro-Gear 51016 from a dealer tomorrow. I assume it will be square cut. I will let you know how everything works out
  6. C

    Repair or replace leaking hydro pump older Lazer z 60

    StarTech. One more question on the o-ring. I see that the description that you attached from Hydro-Gear states that it is a square cut o-ring. I do see a square cut o-ring in the rebuild kit not sure if it is the 51016 but it does appear to be about the right size. What I have seen of the -144...
  7. C

    Repair or replace leaking hydro pump older Lazer z 60

    Star Tech Yes the correct model number for the pump is PJ-BGAB-EY1X-XX its right on a tag, guess I misread the B as a 8 as I said earlier I did buy a seal kit which I hope to return if I only need an o-ring. The kit part number 70525 has a large label that lists the contents of the kit. All...
Back
Top