Recent content by bones774

I put it all together and im not getting any tension on drive belt, mustve fallen off a pulley but i cant see much or figure out why? The F/R pedal flops back and forth. This machine is only 3 years old, motor, Intek v twin 22hp runs like a top, so disgusted i thought this machine was gonna take...

thanks for all your help. big problem is i can't remove the rotating flange because of that welded bar and the fact that the piece rotates fine when in neutral and reverse position, At this point im gonna put it back together and start her up. I did major cleaning , maybe when everything starts...

does the non-rotating flange mean the trans is shot, or what should i look for? thanks

As i work thru the trouble shooting videoing, i;m trying to determine if the problem is internak or external? At this step internal damage is not ruled out? Im in no condition to drop tranny and dismantle the whole unit.

This where I am at now, if anyone can please help. 1) tranny still in machine 2)I removed cover off the driven plate 3)the aluminum ramp was frozen in the up position, had to rotate the ramp with great difficulty to a low spot on mobile flange then persuade it with rubber mallet to drop into low...

Plenty of movement in brake pedal. I think thats covered in the video when they tell you to step on brake to unlock the drive release, but i will check it. Just gave the replace pulley a quick skim, they mention special tool to remove flange cover nut?? Can I work around that?

thanks That is the video i originally watched to ID the problem and found out the pulley would not turn clockwise while in forward gear but then it did not show corectiv actions

No i haven't, i didnt see anywhere to access it and still dont. I tried my best to ID it online and that is what i found, im sorry i miss id'ed it. Im a senior citizen trying my best to navigate this digital world so thanks for all your help.

Hi I have an Ariens A22 with the RS80 transmission giving me problems. newbie here thank for any help. i have an A22A46 with trans problem, RS80. Goes very slow in forward and pedal all tthe way pushed, I went thru the trouble shoot steps, and where it fails is when the foot pedal is all the...