Recent content by BlufftonJim

  1. B

    Keeps running but won't start when pulling the cord.

    Oh, I stopped the gas leak. Then I received the air vane spring, put it on, and same problem, except it won't even keep running now.
  2. B

    Keeps running but won't start when pulling the cord.

    This picture shows what I installed an what it looks like now.
  3. B

    Keeps running but won't start when pulling the cord.

    The air vane spring arrived today. I put in on and that did not fix the issue. When this began, I could start the mower with carb cleaner sprayed in the carb, and it would keep running, but would not start pulling the rope, even after the engine was warm. Now, the carb is completely...
  4. B

    Keeps running but won't start when pulling the cord.

    I removed the carb, added a little grease to the bowl, added the bowl bolt, reinstalled the carb, and...it still leaked. But, I cranked the bolt a little more tight, and it stopped! The air vane spring did not come. Delivery was delayed until tomorrow.
  5. B

    Keeps running but won't start when pulling the cord.

    Hello Rivet! I will give that a try. I will check that. I also need to opinions on the air vane spring. I never found one. Is it missing, or does this engine have one?
  6. B

    Keeps running but won't start when pulling the cord.

    Yes, leaking from the bowl bolt. Gasket is new from rebuild kit. I will tighten more. I was afraid of over tightening.
  7. B

    Keeps running but won't start when pulling the cord.

    UPDATE: I’m a total newbie at small engines, and I’ve had a lot fun with this. I received the carb rebuild kit and cleaned/rebuilt the carburetor. I put all together, and as I was doing that, discovered there isn’t any air vane spring. That was most likely the issue all along. My...
  8. B

    Keeps running but won't start when pulling the cord.

    No kits in this town! I will have to order and wait. :-(
  9. B

    Keeps running but won't start when pulling the cord.

    Everything has been described clearly. Today I have removed the carb and currently cleaning it. I'm going to need to get a gasket kit as soon as I determine the nmber. I will update all.
  10. B

    Keeps running but won't start when pulling the cord.

    Newj day! Air Vane is a new term for me. I will check out all the ideas.
  11. B

    Keeps running but won't start when pulling the cord.

    In the ten years I've had this mower, I never noticed a primer bulb. I will look for it.
  12. B

    Keeps running but won't start when pulling the cord.

    Wow, thank you very much. One final detail to be sure it doesn't change anything, I can let the mower run for, let's say 30 minutes, then turn it off. It's good and warm now, and, I have the same problem. It doesn't matter how long the engine runs. And when I engage the blade, it does it well.
  13. B

    Keeps running but won't start when pulling the cord.

    Okay, that info helped! Here it is.
  14. B

    Keeps running but won't start when pulling the cord.

    This is the only other sticker I could find.
  15. B

    Keeps running but won't start when pulling the cord.

    I took that number off of this sticker.
Top