Recent content by Blacktrain11

John Deere L110 with a 13h.p. engine, when I turn the key to shut off the engine, it starts to sputter and spit but won't completely shut down, I have to choke it out. I replaced the ignition switch but got same result. Any help is greatly appreciated. Thank you!

Husqvarna snow blower Model # ST227P

They are new plugs but I did as you suggested and swapped them, but still the same result.

I have tried it with the kill wires removed with no success, I did a compression test this morning and I have 150 on each cylinder. swapped places with the coils, still the same result, when the engine starts to miss and cut out it is always the same side. A huge thank you to everyone who has...

I have replaced both coils with oem ones.

I removed the fuel cap so i know it is vented and the fuel pump is a impulse fuel pump I have made sure the impulse line is in good shape, and when I hold my thumb over the line I feel a lot of suction. I run the fuel line into a plastic water bottle and it fills rather quickly. As far as...

John Deere D140 (1GXD140EKCC324968) 22 h.p. Briggs Model # 407777 Type # 0274G5 Code # 120224YG Runs perfect for about 10 min. then cuts out on one cylinder. Has new carb. kit, new plugs, new fuel filter, new air filter, new coils. Fuel tank is vented ok, no fuel lines kinked. disconnected...

John Deere D140 (1GXD140EKCC324968) 22 h.p. Briggs Model # 407777 Type # 0274G5 Code # 120224YG Runs perfect for about 10 min. then cuts out on one cylinder. Has new carb. kit, new plugs, new fuel filter, new air filter, new coils. Fuel tank is vented ok, no fuel lines kinked. disconnected...

I have a twin cylinder briggs on my sawmill and would like to replace the fuel pump with a electric fuel pump. What electric fuel pump would you suggest? Thanks...

I have a Cub Cadet LTX 1040 Model #13WX90AS009 Serial #1C150H60087 When you press on the pedal to go forward it takes off like it should for about 30 feet and then gradually slows down to a stop, let off the pedal and press down on the pedal again and it will take off again like it should and...

Model # TR/MWR-Prestige 23H Serial # 2000485819 The two switches i purchased was from a Simplicity dealer and they matched up to what was there. I appreciate your help. Thanks...

I have a simplicity tr/mwr-prestige 23h and it will start with cruise control engaged. This machine has the cruise control lever on the right side and it needs to be in neutral and the brake depressed to start. The engine will start without the brake being depressed and without the cruise...

Received the new variable pulley and that did the trick, works like it should. Thank you all for all your help it was greatly appreciated.

I replaced them with OEM belts...

I tried moving the shift selector when it acts up and everything works ok from 4-7 but 1-3 it slowly slowes down and comes to a stop. I did this without pressing on the pedal. Also pulling back on the pedal changed nothing. I have viewed the belts while driving the mower and when you put it...