Recent content by bigge31566

I have a Bad boy Outlaw 72" and the book calls for part number 038-7230-00 which is a 2.5"x 24" blade, my question is have anyone ever used a longer blade that worked, these blades are harder to find than the 24 1/2" blades

I started centipede grass in seed trays a couple months and would like to know if it is too late to plant them in south ga, since theyre already be trays anyhow

I have a Husqvarna yth22v46 and when start to mow the yard it drives fine but the longer I use mower it starts to barely move and about stops completely, thinking it is the belts but dont hear the belts slipping or squealing, tried spraying belt conditioner and it got worse, after mower sat last...

found it , it unbolts to swing

I have a 2018 oulaw 72" and was wondering how do you swing the fuel tanks, cant find lever

Which one would be a better choice

Im looking to upgrade my Redmax weedeater of 10 years to a newer model of weedeater and the ones close to me is the STIHL FS 94 R , the Echo 2620, and the Shindaiwa T262, trying to figure which is the best or if theyre all to close to call, I also see a Husqvarna 525L at Lowes

I called the company and they said to check drive belt tension because if not tight it will track to left and adjust the rod going to the transaxle

Yes they were all around 14 psi

I have a 2018 bad boy outlaw 72" and when mowing the mowing tracks to the left and I have to constantly adjusting lever to keep straight which is slowing mowing down, when in the neutral position it does not creep, how do you adjust steering

I have over a acre of land and field with mostly centipede grass and it is heavily infested with Sandbur and I've put image for nutsedge and came back later with sedgehammer and I can't see a difference in it yet, is there anything else I can use to kill it

Thanks for the advice, I will use the image and add a little 24d with prodiamine

I live in south georgia and have centipede grass that has been overrun with nut sedge, crabgrass, sandspur, fescue and bahia. I have already put down one round of preemergent and used Avenue south but Avenue seems to not have worked as well I'm looking now to using image for nutsedge, crabgrass...

I purchased a used Husqvarna yth22v46 and just running it for 5 minutes it starts to drags to start,the starter barely turning over put jumper on it starts right up, Im taking the battery tomorrow to have checked just in case but when cold it starts right up, anything else could be causing this

I have a cub cadet m 72 zero turn and when engaging the blades the pto belt runs off if the throttle is med to high open, if its in low it does not come off, any reasoning for this