bentrim's latest activity

  • B
    bentrim replied to the thread Oil Capacity ?.
    https://engineneeds.com/sae-30-high-detergent-oil/ https://engineneeds.com/sae-30-non-detergent-oil/ I do not agree that small engine...
  • B
    bentrim replied to the thread No fuel pump output.
    Not sure how the pickup line goes into the tank -- but if there is a metal elbow that fits into the tank check the line INSIDE the tank...
  • B
    bentrim replied to the thread Compression Tester.
    Years ago I attended a service school and if I don't forget what I was told --- They stated the schrader valve needs to be as close to...
  • B
    When i was working at a small engine shop, had a lot of Honda mowers come in for not starting. Upon trying to solve the problem...
  • B
    bentrim replied to the thread New/Used to me.
    Go to page 1.3 where it explains the model designations otherwise it is a service manual for Kohler command single.
  • B
    bentrim replied to the thread New/Used to me.
    https://www.partstree.com/models/cv16-61514-kohler-command-pro-engine-made-for-toro-16hp-11-9kw/ Note this is the engine listed on the...
  • B
    bentrim replied to the thread New/Used to me.
    According to a post by rivets "your unit was built in 1994" referring to the tractor Kohler engine dating turned up "1994 - 10-digit...
    • 1788029925767.png
  • B
    bentrim replied to the thread New/Used to me.
    A serch of Kohler engine dating turned up "1994 - 10-digit serial number - First two digits 24" from webite...
  • B
    bentrim replied to the thread New/Used to me.
    Interesting debate going here. I decided to check the given toro website https://www.toro.com/getpub/8833 Operator manual for the...
  • B
    Apply some (not too much) pressure to the fuel tank with the hose from the pump to carb in a bucket. If you now have fuel it proves...
  • B
    bentrim replied to the thread Oil Capacity ?.
    I have always felt the manufacturer knew what oil was best for their engines and followed these recommendations. It seems as if more...
    • 1787407208818.png
    • 1787407397483.png
    • 1787408094300.png
  • B
    Be careful with Cd's and manuals not purchased from Mother Deere. She gets very unhappy with those that sell copies. A few years ago...
  • B
    While attending high school I chose to take VoAg with that the teacher saw my mechanical skills and recommended a course at Penn State...
  • B
    bentrim replied to the thread .010 oversize piston???.
    Here is the difference between a cylinder hone and a glaze breaker. The hone is used to enlarge cylinders and keep the bore reasonably...
    • 1783776893246.png
    • 1783777175650.png
Back
Top