Auto Doc's's latest activity

Is this a generator application? Hard to tell from the picture. Is a 1 or 2 pull to start that challenging? If so, the carburetor is...

Looking at a picture of the tank, the fill neck is off to the side and shallow.

This tank is hidden in the rear of the chassis and there are no provisions to add a fuel sender and gauge without some serious...

Please provide the chassis PIN label information so we can get better details in the parts and service information. JD did not build the...

I suspect a drive pulley or a belt is failing. Here is an exploded view of the parts...

The typical life of any battery depends on how it is maintained. If I had to put a number to it, I would say at least 5 years with...

These are what I like to call a "gotcha filter". Some repair shop techs do not even know they are in there. Most of the time they can be...

I suspect the carburetor diaphragm has become stiff from age, and the needle will not work properly. For most, I just order a...

Spray each exhaust outlet pipe with a spray bottle of water and see if they both burn of quickly. This sound like one cylinder is losing...

Hello C., There are many design variables involved so pressures and gallons per minute (GPM) will be different. I suggest you study...

The tension spring in the middle looks to be a generic spring and is not applying tension like it should. The coils of the springs...

What is a Honda "izy". No one can help you with this machine unless you provide label information off of the chassis and the engine.

The equipment market is no longer pro-repair (especially after Covid), so manufacturers price most parts up in the stratosphere to make...

Hi bartles, "Back in the day" most components also had flat mating surfaces, so many gaskets were simple to make. Now, engineers have...

Back when mechanics were actually tradesman, it was routine to make many of the pressed paper and cork gaskets from bulk roll material...