Auto Doc's's latest activity

Hello T., Are you referring to an "X" blade that is used on some machines? What model machine are you asking about? Gator blades are...

I agree the small idler pulley is too narrow for the belt being used. A belt should never ride far to the outside of the "V" of the pulley.

Hello C,. Just for good measure, pull the oil pump gears out of the bottom side of the sump and make sure no damage or metal particles...

Hello S., A few things come to mind: First, a weak battery not providing enough amperage. Second, dirty or corroded fuse pin...

Hello R., Shop around for a product called DeoxIt D5. It is an effective contact cleaner that leaves a protective, yet conductive film...

What does the rest of the engine inside look like? Is this a customer's or you own machine?

Hello C., The mangled pushrod found down inside likely popped loose because the valve lash became too wide, or a valve got stuck in the...

That was built back when rider mowers were made for work and not just to be a fancy show piece.... Simple to work on and maintain. I...

I mostly use Ebay and other online sources like Green Farm Parts, Parts Tree and Jacks small engine. When dealing with older JD...

Hello C., A couple of pictures would be helpful. This may not be to terribly bad. I have repaired quite a few over the years without...

Hello U, Do you have a multimeter and understand how to do a voltage drop test on cables and wires? Try using your jumper cable and go...

That number does not come up on a search. What model is this machine? How old is it?

I typically use acetone and ATF in a small pressure canister when I'm at the shop. If mobile, I use PB Blaster and WD-40

Are you in the U.S.A.? If so, look up Tractor House.com. Is this a 155 articulated model with a front deck you are looking for?

Thanks StarTech, I deleted that reply. It was too early, and my memory recall is not what is used to. Like you mentioned, those caps...