Auto Doc's's latest activity

I cannot say that I have ever seen a 42-inch cut Murray with a bagger unit. I'm sure something could be adapted along with a set of high...

Will it crank back up or is it locked? The description sounds like catastrophic engine failure.

Hello NW1, The first suspect is wrong belt or incorrect routing. If they are trying to turn slow, but not up to full speed, the deck...

Hello jes-in-sac, I know you are likely just making conversation but.... Don't hijack someone else's post like this it creates...

You had the motor off for an overhaul? Was the crank drive pulley installed upside down. Not sure that is possible, but it is an idea.

Hello Mattmotors, Look up Jim Jackson with Jim's Fix It shop on You Tube. He has lots of useful videos on these riders and goes into...

Hello CB36266, The capitol letter (I) is always used when referring to yourself personally. (Use the shift key to make a capitol...

How many acres will it mow before requiring an overnight recharge? What is the rate of discharge with both deck motors and drive motor...

I recommend conventional 10W-30 for at least the first 50 hours of use to ensure complete break-in, then switch over to synthetic.

Look at the governor arm pull spring. It is operated by the mechanism the throttle cable is attached to. The cable mounts to the outside...

Hey look! It's a golf cart with a mower deck. Good for an acre or less of heavy grass cutting? Play the front nine holes, recharge...

Hello Kieth, Well, that is very basic info, we actually need the model and serial number information off of the product label of the...

Any luck finding a drive pulley? Is this for a Kohler engine? Contact me at aghunt83041@ gmail.com I have a 1-1/8 drive pulley and...

Hello hlw49, Does it seem to run normal at high speed once started? Is the choke actually working? The primer is only made to purge...

Hi nbpt100, I support your determination and tenacity to see this project through. Most of us with any length of experience doing this...