Auto Doc's's latest activity

Hello ILENGINE, He could have been a tractor tech and not worked on smaller equipment. Just the same though, I think he would know...

That is one of the biggest challenges on this site. Having people provide the proper information. Always have you PIN (machine label)...

Hi slomo and StarTech, Thanks for uploading examples. Many of our followers are not aware of these strange testing methods that are...

Hi StarTech, I do not have the variety wiring diagram available to study (online is a crap shoot). I recently dealt with a JD 757 that...

Hi slomo, Can you elaborate how you do this?

Disconnect the PTO and run it around to see if it still happens. A seat switch is also suspect, so check all of that wiring. It only...

For the past 2 days I have had reply delays and page cannot be loaded messages happening. No duplicate replies as before, but there are...

Hello Cfs, While out of the head, can you slip the tip of the valve through the large hole down to where the groove is and then slip it...

You'd have better luck finding gold in a coal mine.

Hello riptide25, Not to be a bother, but are you sure both wheels are ratcheting when pulled backwards? These things will trick a...

A Dremel tool with a thin cut off blade and a little patience. If they have the nylon limiter caps carefully score them with a razor...

Hello SMHdrid, Sears don't make the engines or the equipment they go. (It's called private label marketing) A few details about what...

Hello herb069 There are a few of these engines on Ebay, but you need to know your engine label information. What machine it is mounted...

Hello bear369, toro zero turn 76601? You gave us minimal information to work with. The product label numbers and the engine label...

Hi StarTech, The last reply by the OP was not there when I read through the thread, but I delayed hitting send because I was pulled...