Auto Doc's's latest activity

Glad you have it resolved. If there are any signs of smoke, heavy chirping or excess noise shut it down any check the idler and...

A pull behind leaf sweeper with a hopper works wonders. Deck blades spin to fast (even at low idle) to gently pick up fallen leaves.

I was going to mention using a die grinder with a burr bit to shape the hole accordingly. Apparently, the engineers had a hangover...

I think the wheel assembly has to be replaced. They do not show the bearing separate...

Yes, I am referring to the keyed ignition switch.

Hi Robert, When it shuts down have you checked for an overheating ignition switch? Is the backside of the switch accessible? What about...

Hello SamB, Nothing wrong with using a vacuum method to suction the majority of oil out through the dipstick tube. Even using the...

Hello bradcash, Look for the correct model number on the label under the seat it usually starts with "96" Have you look closely at the...

By design, engine running centrifugal force and a small spring retract the cam compression release mechanism.

Hi RevB, As the saying goes.... "Hope spring eternal". How do people learn to be self-sufficient if no one is willing to teach them...

Ebay, sell as is used. Starter spins when tested.

Verify the tank strainer is not partially clogged, fairly common.

Hi StarTech, I had forgot the differences between coils because I rarely get anything with points anymore. Points ignition systems were...

Is the starter acting up when it is installed?

We need a picture of the flywheel for reference. There are different designs. What engine number is the flywheel on? If it is only for...