Auto Doc's's latest activity

Hello TLloyd, Let us know what engine model you are working on. Otherwise, it is all guesswork. Crystal ball is broken and my lucky...

Hello Loulek77, A safety switch acts immediately and not gradually. Your problem description favors debris that is starving the fuel...

Glad you resolved the issue. There is way too much experimental garbage being put on machines and even vehicles without proper stress...

Hi NormanB, That is rational. Verify the actual pump pulse vacuum line is not loose, cracked or split. The extra fuel means more...

Hello tkos115, Have the heads cleaned and checked for any cracks and then resurface them using a thick tempered glass table surface and...

Hello ACF, A little puff of smoke at throttle up is not a bad thing. It will likely clear up with more use. Using Marvel Mystery oil is...

I don't recall B&S making an 11HP twin cylinder engine. I'm still wondering how a "16HP carburetor" was mounted to this. The original...

This problem sounds like one or more of the belt guides have been bent out of place when the deck belt was removed and installed (common...

Most zero turn MTD decks with a center single front hanger rod should be adaptable. The Z-Force models have a double front hanger...

Thanks NormanB, That is the engine info, thanks for that, but Kubota does not build the engine. What about the product label mounted...

Hi Norman B, Sorry for your loss. I am a Veteran, and it is always difficult. As for your mower problem, this is a classic sign of...

Read the manual from Cub Cadet. They are free online. Look it up by you label number you provided earlier.

The name "Time cutter" is an illusion that just cost you more time and money. Similar to many models that now have electronic...

The original (cheap) factory paint is basically sprayed over bare metal, with very little surface prep work. It is then oven baked dry...

Sorry, that request gets "crickets" from most techs. It automatically opens us up to liability and possible legal issues. It is...