Auto Doc's's latest activity

Hello folks, EDIT: This turned out to be a 2nd help request because the original one did not show up when I searched earlier. This...

I have had similar problems in the past if the deck belt was not routed correctly. Some decks have a belt routing diagram on them for...

I forgot to ask... Are you turning the fuel off after shutting down? The fuel needle in the carburetor is not meant hold fuel back when...

I need a legible diagram for JD 757 Z-track I have been "unrigging" for a customer lately. Last 6 number of the PIN tag 022013 which...

Go to Google, then Part Tree or Pro Parts Direct and look up Briggs and Stratton using the numbers stamped into the valve cover.

Sounds like you are on the right track, debris gets in and then rust accumulates. Keep soaking and working it good.

I suggest you check Parts Tree for a replacement coil. You will need the rest of your numbers stamped on the starter cover.

Where are you located? Are there any mower repair shops or salvage operations in your area. Finding a good deck for one this age might...

Does this only have the single 20A fuse? Has there been jump started going on? 308 hours on a PTO clutch is nothing for one of these...

Another fine design made from plastic to save the cost of a 5-cent washer head screw.

An 18V 1/2-inch drive Ryobi impact with correct socket will know the nut off quickly. Then it is a matter of getting the pulley off if...

Hello Blacktrain11, I speculate a sticky valve & valve guide, but a loose valve seat is a familiar problem on those engines if they...

Hello ILENGINE, I know you are trying to cover two machines with similar engines, but let's take one at a time to keep things direct...

Hi StarTech, They have to reset your "timing" to get the heart rhythm back in 2/4 time?