Auto Doc's's latest activity

This girl knows small engine equipment...

https://www.equipatron.com/collections/honda-engines?msclkid=10076c05999f182eae52044776f3a6f2&utm_campaign=Honda%20Engines&utm_content=Ho...

CDI unit? That is a fancy technical term for ignition coil. A simple test to check for ignition fire is to remove the plug and ground...

Hi Douglas, Make sure to check your spark plugs regularly to make sure the engine is not burning too lean. If the porcelain is very...

Model 53AA5A7M710 Serial 1H024Z00013. 360 hrs. This past week I have had an interesting zero turn that the hydro drive totally quit...

Model 53AA5A7M710 Serial 1H024Z00013. 360 hrs. This past week I have had an interesting zero turn that the hydro drive totally quit...

I never recommend bypassing any safety switches based on sound repair ethics. I've seen machine damage, and some serious injuries happen...

Some lubricant migration is not uncommon on these as they age. I've seen them go for years because they are packed with a lightweight...

Check this out: https://repowerspecialists.com/products/john-deere-400-with-kohler

That favors a left side drive motor is not getting fluid due to bypassing, that is why it is whining when the lever is used. The left...

Hello ILENGINE, I've watched the initial video a couple of times and that popping back into the intake is indicative of badly worn cam...

Hi Douglas, That is a restrictor that some models came with to limit the full engine output potential. They sell more of the same...

I'm not sure what you are referring to when saying 1/8". If they are barely opening, then someone as already tried adjusting them and...

The belt chunking a section is most likely the problem. Make sure you take pictures of how the old one is routed before you remove it...

If the coil was bought through Amazon, it is likely a dud. Aftermarket parts are a crapshoot these days. Need to know the numbers on...