7394's latest activity
-
Stop it with all the bypass info please. Safety switches are there for a reason. Having said that......... Tape the plunger down on... -
7394 reacted to Auto Doc's's post in the thread Ryobi RY253SS 2-cycle trimmer dies after about 10 seconds with
Like.
The next suspect would be the fuel filter located on the end of the fuel supply line down inside the tank, or possibly the supply line... -
7394 reacted to slomo's post in the thread Can't find 30W oil anywhere in my area, or on line. with Like.
No it's not guy. It's a thin 10 grade with a ton of viscosity improvers to "act" like a 30w at 212F or 100C. This is apples to...
-
7394 reacted to Auto Doc's's post in the thread Can't find 30W oil anywhere in my area, or on line. with Like.
Heck, in today's throw away society and poor-quality machines, the oil is outlasting the machine.
-
7394 replied to the thread Mower Humor.I want one..
-
-
Upload to an image host like postimages, and paste the link.
-
Thanks, Tom. Looking it over, I realized all I really needed to do was keep the cushion from falling off when I tilted the seat pan...
-
7394 replied to the thread Need string trimmer info.nope.
-
-
7394 replied to the thread Dirt ingestion.Look at those worm drive hose clamps. They tighten but do have gap at the screw area. I quit using them..
-
Yes the cylinder shaped l one, I doubt he does that. He said he just puts a new one on on once a year. I've offered to take care of his...
-
7394 replied to the thread Tips for blade sharpening, how do ya’ll do it?.I just put my blades in vise, and use 60 grit flapwheel on drill...then cone balance First I soak them in pan of water for ez clean...
-
7394 reacted to Tiger Small Engine's post in the thread Tips for blade sharpening, how do ya’ll do it? with Like.
There are tons of threads on blade sharpening on this, as well as other sites.
-
7394 reacted to Tiger Small Engine's post in the thread KAXS.852N4CA spark plugs are very different looking with Like.
How can spec be 3800 RPM when maximum for a small engine is 3600 RPM?