09 Test tank by filling with water overnight over the hole level looking for leaks I filled the tank with water over the patch level. If you can,

09 Test tank by filling with water overnight over the hole level looking for leaks I filled the tank with water over the patch level. If you can,

  • 0
  • 0
08 Apply the patch on the soft body material so it welds together When you sense the material is bonded together, smooth it down with your tools li

08 Apply the patch on the soft body material so it welds together When you sense the material is bonded together, smooth it down with your tools li

  • 0
  • 0
07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling

07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling

  • 0
  • 0
06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to

06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to

  • 0
  • 0
05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by

05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by

  • 0
  • 0
04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

  • 0
  • 0
03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but

03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but

  • 0
  • 0
02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.

02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.

  • 0
  • 0
01 Tools Needed These are the only tools you need to fix your plastic gas tank.. other than the plastic materials to do the job that is..

01 Tools Needed These are the only tools you need to fix your plastic gas tank.. other than the plastic materials to do the job that is..

  • 0
  • 0
M

Repair plastic Mower Gas Tank

When I looked over the mower, it smelled stongly like gasoline. After I removed the body pan, I discovered the tank had a big hole in the side of it. I repaired it in these pictures incase you guys need to know how to repair your slimey plastic gas tanks LOL..
Click to expand...
There are no comments to display.

Album information

Category
User Albums
Album owner
mrstan
Date created
Item count
9
View count
978
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

M

mrstan

Media items
39
Albums
4
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Footer Links 1

Top