Walbro LMK Carb on Kohler Courage 19 SV590-0002 problem

T

thehill

Member
The mower was running. It sat for a few weeks. Then, when I tried to start it, it fired for 1/2 a second, then it would not start. Then I noticed gas running out of the air filter / card/ I would appreciate any help you could give. I have not been able to find any info on this carb or a rebuild kit. Where can I find either a carb or a kit? The numbers on the carb are LMK 124 2574 200?39314 20260613120638.jpg20260613114718.jpg




Engine nameplate IMG_3458.JPG
 

Attachments

  • IMG_8753.jpeg
    IMG_8753.jpeg
    4.6 MB · Views: 12
  • IMG_3114.jpeg
    IMG_3114.jpeg
    1.7 MB · Views: 12
Last edited:
ILENGINE said:
Carb repair kit is part number 12 757 27-S
Click to expand...
Can your dog mow your yard. If it can, can I borrow it. Do you think it could handle a Dixie Chopper XW2500 72 inch cut. That has 33 Hp Generac engine on it. It is a 1997 model. sure makes short work of the 1 acre I mow. It is a beast.
 
Wait a minute in order the repair the leaky seat which this engine appears to be gravity fed you would need 20 521 01-S.
 
Last edited:
Was just doing some checking and discovered that the SV590-0002 is suppose to use the NIkki carb not the Walbro. And it looks like the Walbro in the picture is the 20 853 14-S carb which uses the 12 757 03-S repair kit, not the kit previously posted.
 
Yes the IPL shows a Nikki. But SV590 series also used the Walbro 20 853 33-S which was a pump fed carburetor which would need to be converted to gravity fed if not pump fed.

Did you look at the Kohler PB-255 Carburetor Inlet Seat Kit for Single Cylinder Engines?
 
StarTech said:
Yes the IPL shows a Nikki. But SV590 series also used the Walbro 20 853 33-S which was a pump fed carburetor which would need to be converted to gravity fed if not pump fed.

Did you look at the Kohler PB-255 Carburetor Inlet Seat Kit for Single Cylinder Engines?
Click to expand...
Right or wrong but Kohler shows his spec number and serial number using the Nikki carb with a fuel pump.
 
It won't be the first time Kohler had the wrong info posted.

Then the OP needs to let us know if a fuel pump is present or not as that would require a different Walbro inlet kit if pump fed.
 
You must log in or register to reply here.
Back
Top