Search results

No, everything is still tight. I did notice that the bolts that hold the crankcase cover on came off without any due force. The engine bolts were pretty tight holding it on the frame. The pictures I have listed

I asked Fish to move my original thread here but I guess it takes time. ANYWAY - I finished mowing yestrday and the engine started to make a wierd noise - something like CLUNG, CLUNG, CLUNG with a reduction in rpm-s, then back up to normal rpm-s then CLUNG again and so forth. I started...

Mowed the lawn today 9/27/14 and am getting some wierd noises from it. At high rpms doesn't sound too bad but at half throttle to low makes a noise like "CLUNG, CLUNG, CLUNG.' Rpms go up and down between clungs. I know it means engine work but where to look first? Can't be the crankshaft...

Pictures of mower showing engine, fuel tank location, direction shifter - deck lever etc.[ATTACH=CONFIG]22677

only way I can tell which yardman this is, is, there's a nylon fan on top of the hydro-static transmission just above the drive pulley. today I was mowing with no problem and forward and reverse motion stopped. moving the forward - reverse handle did nothing. I pushed the mower forward and...

I have this Yardman 38" with a 13.5 HP Briggs. I was out mowing a few days ago when everything quit. I've owned this since 2000 so it was four years old before I bought it from an ACE hardware store. I've replace two batteries. The carberator solenoid stopped working so I installed a manual...

Here in northern ny mostly all the gas stations have a gasoline/ethanol mix [10%] I was told by several guys that do logging up here that the ethanol will make problems for all two stroke and four stroke small engines. Neoprene gaskets will deteriorate and leak, vegetable gaskets will...

I have a yardman manufactured in 1996, 38 inch deck number 136A694F401. Last two times I mowed, there was an awful racket coming from the right side of the mower deck. Normally when the mower runs with the blade down, it makes a pleasant whirring noise. I dropped the deck and took it out and...