That’s the one I looked up but can’t find any real info on it.
Oh, that's the one that was on the engine but it doesn't fit the key hole and I cut the wires to extend them to the dash. If worse comes to worse I can install a separate on/off switch along with the other that I already have.
Does anyone have a link to an aftermarket ignition switch that has ground to run? I repowered a Terramite backhoe but in need of a switch.
I picked up a stems that has ground and M but when it is in the run position it breaks the ground.
I have a 2015 Scag TT with a cat diesel and a fellow offered to trade a new gasser even on it but I refused.
I have the diesel because my tractor is diesel and the only gas needed is 2 gallon of 2 cycle per year for the weed eater.
Since the pump bearing is bad I ordered a new pump , flushed the system and blew out the lines put it back together with fresh oil and filter.
Everything is working like new again !!
I had a similar problem here and have my parts, flushed the system with diesel fuel and will install new filter and oil tomorrow morning.
https://www.lawnmowerforum.com/threads/scag-stt-wants-to-go-forward-and-backwards-at-the-same-time.70995/
Well, I took the pump apart and found that the bearing cage is destroyed and half the bearings have dropped which explains the the forward/reverse stick not going all the way back and probably the erratic behavior.
I'll try to get a picture.