I have a toro ccr 3650 R-tec 6.5 that recently has been giving me trouble. Every once in a while on start up, it would rev out of control and I would have to shut it down. Now, when I am using it where there is a deep drift It will do the same thing. It will rev really high for probably 2-3 seconds before coming back to normal.
i have remove the carb and cleaned it. It seems the governor is working properly and I bent the arm the governor spring is attached to so it is stretched, but it didn’t help. Governor linkage not hanging up and no interference. The throttle plate moves freely. I’m afraid every time I start it something will let loose. Any idea would be appreciated.
i have remove the carb and cleaned it. It seems the governor is working properly and I bent the arm the governor spring is attached to so it is stretched, but it didn’t help. Governor linkage not hanging up and no interference. The throttle plate moves freely. I’m afraid every time I start it something will let loose. Any idea would be appreciated.
Last edited: