Have a Husqvarna by Electrolux YTH2448 that had a blown BNS 24hp ELS 725. Just dropped in an older Kohler 25hp cv730s. I have everything in and ready to roll but no turn at the starter. Seat switch is working, park brake switch is working, I can hear the solenoid on the carb and the starter clicking so those are good, I even swapped out the starter. Could this be a fuse, bad solenoid on the tractor (do I need two as the starter already has one) or is it the wiring in the harness? I am actually looking for a wiring diagram for the ELS to no avail so I can rewire the engine to the tractor. I have already done this with a Kohler 20HP (not enough power for this mower so I pulled it out). If I could figure out what color wire goes to what on the ELS I can splice it to match to the tractor harness. Trying not to go hand over hand with this wire research. Diagrams would help greatly.