Anyone ever try Superzilla had a wheel to get off, was all rusted on. Sprayed with Supperzilla let it set for a little while and it cam off pretty easy. This stuff works. Had a pulley to get off a hydro and could get to the top through the frame. Took a pry bar and hammer and tried to drive it off no luck. Sprayed with Superzillz put a longer bolt and washer in the hydro shaft so pulley would not fall off and get bent when it hit the floor, it came off easy.
Superzilla
- Thread starter hlw49
- Start date
- Joined
- Sep 24, 2017
- Threads
- 265
- Messages
- 6,614
never heard of it
https://superzilla.us/ Good stuff.
Hammermechanicman
Lawn Addict
- Joined
- Jan 10, 2020
- Threads
- 65
- Messages
- 3,803
Interesting. From the website
"As a PENETRATING OIL it is the best in the WORLD! Superzilla has natural capillary action since it’s made from plants. Superzilla will literally walk through a rusted nut."
"As a PENETRATING OIL it is the best in the WORLD! Superzilla has natural capillary action since it’s made from plants. Superzilla will literally walk through a rusted nut."
PTmowerMech
Lawn Addict
- Joined
- Apr 16, 2018
- Threads
- 423
- Messages
- 3,235
I was just thinking. Since vinagar works so well on rust, I wonder if putting some in a spray bottle and use as penetrating oil would work.
Hammermechanicman
Lawn Addict
- Joined
- Jan 10, 2020
- Threads
- 65
- Messages
- 3,803
Chemical engineers with a lot of education and resources spent a lot of time developing products like PB blaster, Rust Buster, Kroil, Deep Creep, Liquid Wrench, etc. But I think guys messing with stuff under the sink and in their garage can do a better job. Just say'n.
On the wheel I was trying to get off that would not budge. I sprayed the Superzill on it and it penetrated all the way through the hub. It does work. Use it all the time.
Last edited:
- Joined
- Sep 24, 2017
- Threads
- 265
- Messages
- 6,614
I have a better penetrating oil, Godzillla!