I know it’sa mower forum, but I do believe I can find the best answer from you guys. The hose connector to the pressure unit is leaking and causes low pressure. This is a picture of the hose connector which is obviously peened. I think both connectors should be replace but what is your opinion.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Simpson pressure washer sprung a leak.
- Thread starter Scottcc
- Start date
More options
Export thread
No O ring that I can find. Model # for the triple A is DW3635. Thanks.Looks like a quick disconnect coupler. Have you checked to see if there is a missing O-ring? Giving us the model number would make it a whole lot easier to help you out.
This parts diagram shows 2 O-rings. http://www.pwoutlet.com/v/vspfiles/assets/images/7112736 DW3635 REV C.pdf
I haven’t took the pressure side connector off. The picture is only of the quick disconnect, that inserts inside of the pressure connector. I think something was out of spec that caused the peening in picture. I think both parts should be replaced, but I wanted to hear what you experience people opine.This parts diagram shows 2 O-rings. http://www.pwoutlet.com/v/vspfiles/assets/images/7112736 DW3635 REV C.pdf
missing or cracked O ring in the female connector.Looks like a quick disconnect coupler. Have you checked to see if there is a missing O-ring? Giving us the model number would make it a whole lot easier to help you out.