My 2008 Scag Tiger Cat tries to start in the "on position ".
When you turn the key to start position it does nothing.
I have 12.7 volts.
I have checked a replaced all fuses.
I have installed a new key switch.
I have replaced the starter and starter solenoid.
I have replaced the relay switch with diode.
Any ideas on what is going on?
When you turn the key to start position it does nothing.
I have 12.7 volts.
I have checked a replaced all fuses.
I have installed a new key switch.
I have replaced the starter and starter solenoid.
I have replaced the relay switch with diode.
Any ideas on what is going on?