I have a Husqvarna YTH2348 with a Briggs 23 HP model 445577-0755-E1 engine. It has a Nikki 698494 carb.
The engine will start but only run a few seconds before the carb starts flooding and gas and oil blow out the exhaust.
The carb has been cleaned and rebuilt twice and it does the same thing. With the fuel bowl full I took the gas line off at the pump and tried to blow back to the carb and couldn't so I think the float needle is sealing good. The electric fuel shut off was tested and is working fine.
Can anyone help me?
The engine will start but only run a few seconds before the carb starts flooding and gas and oil blow out the exhaust.
The carb has been cleaned and rebuilt twice and it does the same thing. With the fuel bowl full I took the gas line off at the pump and tried to blow back to the carb and couldn't so I think the float needle is sealing good. The electric fuel shut off was tested and is working fine.
Can anyone help me?