Hello all Today I attempted to change the oil in my drives. After I finally got my filters off (it took two filter wrench's on the left side to get it off) I removed the left side vent plug and the right side I couldn't get to the plug. I started adding oil until it came out of the left side plug, once I installed the left side plug the system wouldn't take any more oil I have probably have at least 3 quarts in there right now. My question is if by tomorrow morning if the level hasn't
dropped any lower would it be safe to proceed with lifting the mower and running the drives back and forth like the manual tells you to do or could I damage my drives? I'm going to have to pull the belts off as the manual says and hopefully be able to get to the vent plug doing this. Thanks for any help you can provide.
Mark
dropped any lower would it be safe to proceed with lifting the mower and running the drives back and forth like the manual tells you to do or could I damage my drives? I'm going to have to pull the belts off as the manual says and hopefully be able to get to the vent plug doing this. Thanks for any help you can provide.
Mark