rer
Well-Known Member
- Joined
- Mar 11, 2011
- Threads
- 10
- Messages
- 100
Both of my old poolans crapped out. first I had to re route the fuel lines around the primers. Then they cracked 5 min later. I replaced the fuel line on one now the needle will not seat. Flooded. pulled out the other poolan and same thing. except I stopped there. both saws were indestructable until this point, giving me at least 100 hours of service apiece. I am getting to know too much about the ol poolans.
Well i went to lowes to check out the new ones. I coulde't bring myself to purchase one with the oddball new carbs. The carbs on the new ones are the same minus the throttle butterfly. It is up top on the plastic thing that holds the carb on:thumbdown:. Does anyone know of a saw that does not have this setup?
I took a trip the Hillcountrypowerandoutdoor parts trees sister company and they don't stock the needle.
while I was there i took a look at the stihls , eccos, and the huskies. they both have the oddball carb setup. has anyone had an experiance with a Mccoulla?
Well i went to lowes to check out the new ones. I coulde't bring myself to purchase one with the oddball new carbs. The carbs on the new ones are the same minus the throttle butterfly. It is up top on the plastic thing that holds the carb on:thumbdown:. Does anyone know of a saw that does not have this setup?
I took a trip the Hillcountrypowerandoutdoor parts trees sister company and they don't stock the needle.
while I was there i took a look at the stihls , eccos, and the huskies. they both have the oddball carb setup. has anyone had an experiance with a Mccoulla?