Hey All

[amsoilman]

Hey all: Yes I am a newbe but have been doing Lawn Tractors from Turnapoles to electric. I find your forum very informitive for all tractors.I am an T-1 Certified Amsoil Dealer. So if there is any questions pertaining to Amsoil Products please donot hesitate to ask. Thaks for having me.
Amsoilman

 

[Parkmower]

Got any sample quarts for me?

 

[Sammy the Red]

Welcome Aboard.

 

[jmurray01]

:welcome:

welcome
​

 

[amsoilman]

Got any sample quarts for me?

Parkmower: Thanks for the invite to your forum. I donot carry SAMPLE anything except proper Amsoil Information to help educate most DINO users. Those sample packs as far as Im concerned will put you in the poor house. Most people.(of course not on this forum) Cannot read or mix properly. ) Therefor it causes issues. You can save on lubs by being able to cut oil mixtures by 1/2 to 3/4 of what Dino uses..Stop our dependants on Forgien oils.REally its true.All recomendation for mixing is for DINO lubes and NOT synthetics. Parkmower if I can be of any service to you and all other Mambers please let myself know. I can show everyone how to buy Amsoil products at the same price that I pay.(I have been with Amsoil for 11 yrs)
Respectfully:
Amsoilman :thumbsup:

 

[amsoilman]

Sammy Da Red: Thank you for accepting myself into your family. Hope I can contribute to the Forum.I can answer almost all questions pertaining to Amsoil Products so donot hesitate to ask. (11 yrs T-1 Certified Dealer)
Thanks again.
Amsoilman

Welcome Aboard.

 

[amsoilman]

:welcome:

welcome
​

Hey Murray: Thanks for your response and accept to your family. I hope I can be of support to your forum. Thanks again. Amsoilman :thumbsup:

 

[reynoldston]

people.(of course not on this forum) Cannot read or mix properly. ) Therefor it causes issues. You can save on lubs by being able to cut oil mixtures by 1/2 to 3/4 of what Dino uses..Stop our dependants on Forgien oils.REally its true.All recomendation for mixing is for DINO lubes and NOT synthetics. Parkmower if I can be of any service to you and all other Mambers please let myself know. I can show everyone how to buy Amsoil products at the same price that I pay.(I have been with Amsoil for 11 yrs)
Respectfully:
Amsoilman :thumbsup:

What are you mixing? I have been using Ams oil in every thing but my push mowers and log splitter. I reason I use dino in them is very low hours of use a year and I am too cheap for Ams oil. When I use Ams oil I don't mix anything. The only time I mix something is I mix oil and gas in my 2 cycle chain saw and that is a 50:1 mix. I am always looking for a way to save money, so what is the big secret to cheaper Ams oil? The big reason I use it because because I don't have to change my oil as often, so it dosen't cost any more in the long run. 20,000 miles car, 10,000 miles motorcycle, 100 hrs. on equment with hour meters does this sound right?

 

[amsoilman]

What are you mixing? I have been using Ams oil in every thing but my push mowers and log splitter. I reason I use dino in them is very low hours of use a year and I am too cheap for Ams oil. When I use Ams oil I don't mix anything. The only time I mix something is I mix oil and gas in my 2 cycle chain saw and that is a 50:1 mix. I am always looking for a way to save money, so what is the big secret to cheaper Ams oil? The big reason I use it because because I don't have to change my oil as often, so it dosen't cost any more in the long run. 20,000 miles car, 10,000 miles motorcycle, 100 hrs. on equment with hour meters does this sound right?

Reynolds: Thanks for your response. The mixing is the Ratios of 2 strokes that I was refering to. I mix everything 80:1,sleds,chainsaws,Weed wackers and my wifes pride and joy(no not me)Lawnboy self propelled mower.Im not sure why you let that DINO lube stay in your splitter and push mower through your idle period time and let her set for a month or more.RUST PITS and water build up.Amsoil gets IMPREGNATED into metals and does NOT drain off or dry up. To save money is to use Amsoil Products in EVERYTHING that need lubing.We make products for every kind of lubrication. Now to save you on Amsoil products I can sign you up as a prefered customer(P.C.) for $20 a yr and purchase all Amsoil products at My cost.Im in a group here that we order about 15,000 lbs a month and get much lower shipping and maybe some discount on product.If you have any questions on how to sign up please contact myself back and I will walk you thru the process. Thanks again for your interest.
Amsoilman. :thumbsup:

 

[reynoldston]

As far as the push mowers go I have two of them and maybe get about 5 hrs. a year running on each and maybe close to 40 years old. I change the oil in them every spring. No problems with them. The wood splitter is just worn out and oil just gos through it. Being in my 70's I buy most of my fire wood any more all cut and split anymore, just too hard on the body anymore working in the woods. Not going to change anything on them. You are welcome to e-mail me anytime reynoldston@hotmail.com with the cost of the Amsoil. I use the amsoil in my motorcycle, two mopeds, two ATVs, boat, dune buggy, two riding mowers, pick-up, and car. My son in law sells Ame's oil in his auto repair shop so I get a break on cost there. The only thing I don't get a break on is my cycles oils, (2 and 4 cycle) seeing he has to buy in case lots and he has no use for this type oil.