Hi Rivits,
Well I determined that my mower provides 29.6 volts (page 7.10) and is therefore a 16 amp system. Unfortunately testing such a system requires a DC shunt tool which I don't have. Do I need that tool to take my testing further?
Hi Luftydog,
My ohms reading was 2.2 which is correct for GT3.5 clutch. I'm pretty sure this is what I bought and that's definately the clutch which Scag specifies. Unfortunately the amps test was a failure: there is a two wire lead from the clutch to a connector from the wiring harness - the connector has a black and two blue (connected) wires. With the engine running and clutch engaged / disengaged I failed to get any amp reading. I presume this isn't possible and somehow my meter probes aren't making a good contact. However, before I take this further, can you just confirm a zero reading isn't possible.
Cheers, Peter