I put on a Stens 265-201 deck belt for my Pony model 13WN77KS011. Even if I move the PTO handle slowly, the belt slips off. The spindle guards are in place. The idler pulleys are aligned.
With the mower off and PTO lever disengaged, the belt looks like this on the main pulley:
There is no adjustment that I can see to put tension on the belt when the PTO is not engaged. I'm thinking the PTO cable is stretched and could be replaced?
With the mower off and PTO lever disengaged, the belt looks like this on the main pulley:
There is no adjustment that I can see to put tension on the belt when the PTO is not engaged. I'm thinking the PTO cable is stretched and could be replaced?