Craftsman snowblower help

[Isaac22]

Hello I have an old little craftsman snow blower with a 2hp engine I think it is Briggs but I'm not sure. But is has a probolem when I go to pull it it won't start won't start I can pull it forever it just won't start but when I put starting fluid in the carb after 3-4 pulls with starting fluid in the carb it will start and run for a few seconds then die. So I looked up a new carb and just couldn't find one I also looked up a kit and couldn't find that ether I got fresh gas in it and it gets good spark and by the way it is a 2 cycle I wound really apresheate any help

 

[BlazNT]

We can not really help with out the model number of the snowblower at the least. The engine model number would be better,

 

[Isaac22]

Sorry I'm late but I looked and found this plate on the engine so I took it off I will include a picture of it. I also would prefer a new carb becuse I Tried to rebuild. One myself before and In the middle I ended up taking it to somebudy becuse I couldn't figure it out.

 

[BlazNT]

http://www.searspartsdirect.com/part-number/632129B/0071/143.html
$76.06