btreadway2003
Forum Newbie
- Joined
- Mar 15, 2023
- Threads
- 1
- Messages
- 1
Hustler Super Z model 927053
28HP EFI Kohler
Picked this mower up recently.
Rectifier is putting out 15.4 volts directly to the battery. This is the way it was wired when I purchased it used
New battery
I can put a meter on the battery while at full throttle and watch it slowly drop in volts. I have tested the wire connected to the battery and it is putting out 15.4 volts when not connected to the battery. Does this wire need to run through something else to actually charge the battery? If I test at the rectifier I am getting 15.4 volts as well. Not sure why this battery isn't charging. Any help would be appreciated.
28HP EFI Kohler
Picked this mower up recently.
Rectifier is putting out 15.4 volts directly to the battery. This is the way it was wired when I purchased it used
New battery
I can put a meter on the battery while at full throttle and watch it slowly drop in volts. I have tested the wire connected to the battery and it is putting out 15.4 volts when not connected to the battery. Does this wire need to run through something else to actually charge the battery? If I test at the rectifier I am getting 15.4 volts as well. Not sure why this battery isn't charging. Any help would be appreciated.