Ariens 1440 EZR Zero turn

[Bingo]

I'm new here. I have an Ariens 1440 EZR zero turn. Something got under it and broke the cooling fan on the left hydraulic drive. I cannot find a replacement pully and fan for it. It is an Eaton drive motor, and I was told it was used on Gravely, Husqvarna and John Deer. Can anyone give me some information on this motor as the Ariens numbers are obsolete (Not Available). If I can look it up under another tractor company and model, I may have more luck finding what I need. Numbers 52&53 Thanks for your help! Arens part no.01528300 and 01528400ur help!

 

[Bingo]

Found a little more info. It was built about 2000 and it is an Ariens 915004

 

[Skippydiesel]

If no longer available, try modifying a fan off an electric motor. Be sure, fan blade pitch / air flow is correct for your application

 

[kbowley]

Found on ebay; Here you go. You should be able to re-use the snap ring.

 

[Bingo]

Thanks Kbowley, but that is just the fan. The real problem is the pulley. The fan I need is 6 inch 10 fin and yes, I did find one for about $15 Again, Thanks.