LionsFanatic
Forum Newbie
- Joined
- Sep 21, 2015
- Threads
- 1
- Messages
- 3
I have this new mower that has less than 2 cutting on it. It just died and now will not restart. Numbers on the housing reads :126M02/6675-F2/13092558
Now, I replaced the E-3 plug <Briggs service line told me they had a problem with them .Set Gap to .020
I also replaced the governor /slinger and doubled checked the timing marks. I also cleaned the carb, checked the float and seat.
I removed the Armature Magneto and it OHMED with my meter set at 20k I had a reading of 6.21. Is that too high for this model . I know the older model should read 2.1-5
Please help I am at a loss. I hate to keep throwing money at this machine.
Now, I replaced the E-3 plug <Briggs service line told me they had a problem with them .Set Gap to .020
I also replaced the governor /slinger and doubled checked the timing marks. I also cleaned the carb, checked the float and seat.
I removed the Armature Magneto and it OHMED with my meter set at 20k I had a reading of 6.21. Is that too high for this model . I know the older model should read 2.1-5
Please help I am at a loss. I hate to keep throwing money at this machine.