grizzlyblair
Forum Newbie
- Joined
- Nov 5, 2016
- Threads
- 2
- Messages
- 5
I am new to the forum so please bear with me. I read a previous thread concerning the same problem and it was suggested that the owner try disconnecting the kill wire from the ignition switch. So, if I disconnect the wire and the engine starts does that mean the ignition switch is bad? My mower is a 1997 Simplicity Sunstar and it hasn't been but a few years since I replaced both coils. I checked the solenoid on the carb and it clicked as it should. Ignition switches are fairly inexpensive I was wondering about replacing it since I don't see the kill wire. Any help is appreciated. Thank you.