Search results

Been going thru the love hate relationship with this stick.If you run this hard as in edging,and it gets hot and cuts off,is this normal? I'm thinking i need to adjust the idle speed or the throttle speed.Otherwise it's a very versatile tool.Took it to the shop once,and yea they set the...

So I've been in the market for a pressure washer..decided on a Simpson 3200,but since I'm not gonna need it much,I've decided to do a Westinghouse 3200.Price was a main factor in case I manage to mess it up,and I will.Simple easy to use.Plenty of power.What say you all?

I've got the MS 170.A good saw for novices like me.But using that jig has me wary.Although I've yet to use the saw since "trying" to sharpen it.What do y'all think about the 2-in-1?

Hey all,new dilemma.Lately my "stick" has developed an attitude.As I am using her to weed eat,she'll cut off like it ran out of gas.This happens after about a good 10-15 mins in.Fuel filter is ok,new plug & air filter.Have ALWAYS used tru fuel in it.Sounds like a carb issue?

Hey folks,here's a queerie.Has anyone sent off for a champion plug to only to get a replacement? A HIPA sparkplug? Is this legit?

Gentlemen,and ladies...it's been a minute.I have a RWD 10330 that I have had since 2015.Given to me me from the original owner. She,up until I got it,had never changed the oil(jsmh).Well I babied it and it responded well.Now I'm having problems starting it.I know it needs a good carb cleaning...

My Lawnboy 10330 has been acting up lately.I use it for my flat backyard.So i'm using the Husqy.Adjusting/lowering the height is whew!!! Lowering the front wheels,you pull the adjusters towards the rear.Adjusting/lowering the rear wheels,you push to the front.Gotta get that Lawnboy straight,but...

Hey folks.I'm hoping someone can possibly tell me where I can get a gas cap for a 10330.

I'm having trouble getting replies on this.I have a B&D LHT 2436 hedger for 3yrs now.Time to get it sharpened.CORRECTLY.Are there places that are B&D authorized to sharpen these tools? Or do I buy new one?

So i had been using a Pulan electric chainsaw for a while.Small problems here and there even i could do.Eventually,last year i stepped up and got a small gas chainsaw.A Stihl MS170.So for the past year i really just played with it.Learning the braking,revving it up,but mainly just getting it to...

Hi all.Last Sat 6/25/22,i brang home my moms TB110 push mower.Practically brand new.Well i couldn't get it started with new oil and fresh gas.Just would not turn over.Had to undo cord to get it folded.Get home to see what's wrong, now it won't pull.Hadn't even done the carb-cleaning yet.Any help?

I recently order some SAE 30 oil for my lawnmowers.It's B&S 4 cycle for small engines.I thought lawn mowers were 2 cycle.Is this okay to use?

I have learned through some posts that this mower is being discontinued.If that's the case,what is the newer version? What is the difference?

Is there a hack or something i can use when changing my oil? On my Husqvarna HU700F mower,i tend to get oil on the deck and floor when tilting.Short of buying a pump (i prefer to tilt),what can i do to extend the neck?

Hi all.Just wanted to talk about the C26-2 head that came on my FS 56 trimmer.These heads are awesome!!! Especially for beginners.Just thread your line thru to a good length on both ends,then push the head in and twist.That simple.Wish i had this on my FS 70.When this wears out i will definitely...

FINALLY!!! Went and bought me a MS 170 chainsaw yesterday (7/29/21). Nice little machinery.I'm already thinking of modifying the tension screw to go in the middle. Seen Donyboy on YouTube do it.If anyone is using 1 of these,tell me how you like yours?

Hey all.Hadn't been posting for a while,so here's my queery,acquired a good Husky last spring(March 2020). So now I'm thinking of getting a set of front wheels BEFORE these wear to far down.Husqvarna HU700F,Front self propelled,Honda G V 160 engine.Anybody got a good online place to send me?

The 1st Sat of June 2020 i was set to do major yard work by doing hedges 1st.Got my 40v hedger (LHT2436 bouht 5/22/19) and went to start it and it stalled.Hmm,that's not good.Battery was charged full,but no connection.Called B&D stated problem,and they promptly sent a new battery AND...

I know you guys can put me on the right trail.What would be the best way to acquire a bagger for my GCV160? Do you think Amazon or one of the "big box" stores?

I acquired this mower about 3 months ago (March 2020) after it had sat for about 2 years.Cleaned the carb,changed the oil,new filter,etc,Runs like a top.I at first didn't know about the shut off valve or what it was for until i saw som Youtube vids,now i know.I tried using mine,but the mower...

Someone's bringing this mower over.Says it won't start.Anybody know about these?

Has anyone taken 1 of these off lately? I did.l had no idea.The gasket sequence baffled me for a week.Along with the linkage assembly.You can tell i'm a novice.Well inside the carb is your fuel jet.It's a small screw that will give you a fit.Then a flute-looking thingy you clean also with a...

Hi all.Coming over from the Craftsman,Lawnboy,Stihl,& Black&Decker forums. Brand new to Husqvarna ownership.So here goes.... My boss's mom-in-law had this lawnmower that was only used twice after buying it brand new. However it sat for 2 or more years in her shed so naturally it wouldn't...

Anybody good at fixing Craftsman lawnmowers in Greensboro,NC? I need mine repaired ASAP.Hit me up.

I have very little need for a chainsaw,but i'd rather have and not need.....I'm getting 1 or the other.Leaning towards the 171.Reason: placement of tension screw.As small a saw as i'll need,it shouldn't matter,but in a pinch,if i needed to adjust the chain tension,it'd be quicker and easier from...

Hey,Happy 2020 Lawnworld family.I am now in the market for a new mower.I'm looking for real reviews of the new Craftsman self propelled FRONT wheel drive lawnmowers.They are now being sold in Lowe's.M series i believe.Can anybody share any info on these? I've seen models that have Briggs motors...

Ordered a pulley from searspartsdirect.com TWICE.Both times after charging me,i get a notice telling me "not in stock".Called a few times and each time i get someone in the Phillipines,WTF!!? I've tried Amazon AND Ebay.No luck.For a Craftsman model #917.377131.Part #137052.Does anyone have any...

Hey all,sad news..my boy is down.Ordered a drive pulley for my S-P Craftsman 22" walk behind mower, TWICE.Both times i got a refund back to my account from searsparts direct.com.We all know Sears is about to go under (jsmh),but i didn't think they'd be out of parts so soon. The part was about...

Just orderd a 24",40 volt,cordless hedger.Wondered if anyone else has 1 and how is it?

Hey Lawnworld.'S been a while,but here i am.Went to a local Stihl dealer (Ace Hardware),and looked over some chainsaws (leaning towards a 170 or 171),but really was looking to choose the right blower.I'm not moving gravel,wet/dry leaves,or anything else besides grass clippings on driveway and...

I have a Stihl FS70rc.what do the letters mean?

Quick question:Can the air filter on a stihl weedeater be washed and reused? If so,what's the bezt way?

Enjoy the day.Break out the weedeater.

Enjoy the day.Go do some yard work.

As a former Marine i'd like to givethanks to all you vets on here.May your daybe great for mowing,weedeating,and yard work.All this because of you all.Ooo-Rah!!!!

Hey all.I have an older craftsman 22" self propelled mower which is an awesome machine.Runs beautifully for a 17 y.o.(011601M) mower.My thing is bagging.When i do bag at times,it seems the flap doesn't seem to close completely flush thus letting grass and stuff fly out all over the...

Hi all.I own a B&D hedgetrimmer (HT 020).Had it about 6-8 yrs.This old 20" has been a blessing.Now it's time to sharpen.My question is about the file size.i presently own a 12" half-round,but it seems a bit overkill.Thinking of buying a small round file.Tapered.What say you?

Ok,i've got the FS 70rc weedeater.Works fantastic.My feed head is a c 23-2 autofeed.So to advance line,should i a) tap and then speed up or b)speed up and then tap? Neith seems to work for me.But if i push i the head manully,it's fine.I'm sure my techique sucks.

Hi all.I've recently was given a 1999 Lawnboy by a coworker.Was told nothing had been done as far as anything extensive other than a blade change.So it runs good.I personally changed the oil and cleaned the filters.It IS very light.Waaay lighter than my Craftsman.I'm wondering what is supposed...

Switching from B&D electric hedge trimmer and looking for a good B&D cordless model.Any recommendations?

Hi all.I've had an eletric B&D hedge trimmer for the past 8-9 years.Looking to switch to battery power now.If I can't settle on one then i'll buy another B&D 20".It was a great unit.

Hi,Mike in Greensboro,NC.I was given my 1st Stihl in Aug.(2017).It wouldn't do more than idle.Repairman took the spark arrestor out and BAM!!!! Like new money.Only thing,it is louder.So what I wanna know is...how do I put a new 1 on.Since i'm new to this,can somebody give me step-by-step...

Yesterday a neighbor saw me weedeating my yard and asked for help.She must've just come from Walmart earlier and purchased a new Murray.Side discharge,non self propelled,small wheels.After she had put it together it would not crank. I checked it,put the cord on the hook and tightend.but it did...

2 weeks ago I was on Randleman dan and couldn't catch a cold.Weather was a beauty but the water was still cold.Used Tx. rig,Spinner and buzzbait,PLUS top water.Everything.Anybody had any luck?

I'm getting it wrong I guess.If I lets say,on the right front wheel push the heigt adjusment lever to my right,going away from the mower,it lowers the deck,resulting in a higher cut? Naturally doing the same on the other side and opposite direction for the back?

This walk behind self propelled mower has not and does not start simply.I have redone the carb twice (middle of last summer and Saturday 4/09/16),Replaced all gaskets but when priming I don't hear any gas moving.Checked the primer bulb,all is good there.Just cant figure this mystery out.Any...

Hi all.Here's my situation:last year I replaced the belt,pulley,blade,filter,and completely rebuilt the carb.Mower ran excellently.Just wont start on the 1st pull.Not a problem.Now since storing over the winter(no gas in Mower),and now restarting,it takes too many pulls to start up.Checked the...

My Craftsman walk behind has been tuned up pretty good.New oil,filter,spark plug,rebuilt carb,fresh gas.I notice when it runs the muffler will sputter at times.Dont understand why.

Can someone please tell me why i can't upload pics directly from my android fone? Followed all steps and no can do.Do i HAVE to use a computer? Smh.

Hello all.I'm new to this,but from a lot of what i read,i can see i'm with the right people.Thanks for having me.By the way...we got any bass fishermen here?