Recent content by glennsjr

Don't know about your Simplicity but with Cub Cadets just take off the filters.

I have a 2018 Z-Force L and noticed the fans on the Hydros are loose. Can I replace them without dropping the Hydros out of it?? Looks like a pain in the butt ? Thanks in advance for reply's

Thank you StarTech

Sorry about that it is a SRM-2620

Have a Echo ST 2620 Extreme Have had it 3 or 4 years. Allways started right up and still does but once its warmed up will stall right out on restarts and have to prime the bulb and choke it to get it to restart. In the past would start right up on 1st pull. Cold start is fine just the restart...

Easy fix You Tube Thanks

Hello guys, Bought a JD E120 because I got a really good deal on it. It only had 11 hours on it. I converted it to a regular filter and it runs great ecept for the button you have to push to back up. I'm sure by now someone knows how to bypass that button?? Mind sharing your secret ?? Thanks

Thank you !!

The other day buried in the back of a shed is a small Simplicity rider. Can't get to it but see it is Gray with Blue writing for Name. Thought Simplicity was always Orange and white ??

Have a Cub Cadet SLTX 1054 that after using about 15 -20 mins the transmision starts slipping (or slowing down) I have changed the drive belt and the tension seems OK. Pulled the plug on top and fluid is at the proper level but black. Machine has about 300 hrs on it. Should I draw out the fluid...

Thats my problem, Don't have a $20.00 one just a Mac tools one and that doesn't tell you whats overheating or what temps on what are acceptable

How do you know if a small engine is overheating or not?? Over the years see post that say it's overheating but how do you know ???

Replaced the spindles on my sltx 1054 Do you think it's worth drilling tapping and installing grease fittings ?? I know they are sealed bearings but my understanding is the grease helps absorb some of the heat so they will run a little cooler. Just curious

Yes sir I did

Have a Cub Cadet SLTX 1054. Put new blades on and noticed a vibration. Thought it was me but the vibration got worse and finally the belt came off. Noticed that the 2 of the ears had broken on one of the spindles. Pulled the deck off and ended up replacing 2 spindle assembly's. Put the deck back...