Recent content by crosstalk
-
C
Honda H1011 riding mower transmission problem
Hello. My honda 1011 (gear drive) was riding along just fine then no drive. The drive belt looked like it had slipped off the pulleys, so I put it back on but noticed the transmission pulley was really wobbly and spinning freely on the input shaft of the transmission. The drive belt slipped... -
C
honda hrx217hxa recall info
Hello. I picked up an hrx217k1 (frame serial MAGA-1423469) in almost new condition over the weekend. I think there was a roto-stop-related recall on this model, but I am not sure if this unit was updated. Also, if the recall just involves replacing the clutch return spring (75185-VE1-G00)... -
C
Honda H1011 engine speed/throttle adjustment
My H1011 rider seems to be driving a bit slow so I thought I should check the engine speed. Does anyone know the spec for idle and top speed for this machine (frame MZAW-6037582)? Also I am having trouble getting the throttle lever to hold in the choke detent position, so any help on the... -
C
honda hrb216hxa crank bolt removal
Hello. I am trying to remove the roto-stop assembly to check it because the roto-stop cable got damaged (see my other thread about the recall work:http://www.lawnmowerforum.com/honda-forum/12270-question-about-older-honda-recall-notices-2.html#post113251). It seems the dealer over-tightened... -
C
Question about older honda recall notices
Does anybody know how honda handles older recall notices (from around 2003)? Maybe honda will send out replacement parts if I call? I just realized have a couple of honda units that I bought used and have no idea whether the recall work was done (replace roto-stop on one and fuel tank on another). -
C
Rear wheel tilt on hrb216hxa
Hello. I had really worn pinion gears so I replaced those and now I noticed the rear wheels (mostly the left) has a bit of a tilt with the top of the wheel closer to the cutter housing than the bottom. This probably has nothing to do with the pinion gear (could have been that way before), but... -
C
Honda hrb216hxa wheel pinion gears
Hello. I picked up an hrb216hxa with drive problems. Turns out the pinion gears were installed backwards and extremely worn (on one of them the teeth were completely worn away on half the gear). Flipped them around and the hydro is working well. Strangely the gears on the wheel side looked...