New profile posts

Results 1 to 10 of 188
"Have you ever pulled the metal engine shroud and cleaned the top of the block and cooling fins? This is a yearly maintenance item in ALL engine manuals. Neglect this and you are looking at engine damage." I did it!!! And got lucky as it was very clean at 450 hours. Thanks for the nag.
Hi Robert, I replaced the pan gasket on my HRM 215 sxa mower and now the governor doesn't work.I can manually adjust the rpm by moving the governor actuator, but the actuator doesn't seem to do anything by itself. I saw your response of July 20, 2012 for similar problem, and would appreciate if you could show how to recalibrate the governor, if that might be the problem. Was there a procedure I missed? Thanks!!
Hello, I am new to the site, I have a John deere lt180, the deck height adjuster and the pedal used to raise and lower the deck will not go past 3 on the dial, any help would be appreciated
Try running another ground wire from negetive side of battery to engine block, sometime they will loose a ground and this is a good way to find out.