I made a video of the problem I experience (link below).
So my riding mower does go (with a lot of trouble pushing the pedal) in reverse, but when I try to push the forward pedal I hear a slipping noise.
The belts are good and not loose, I searched the internet and I cannot find this issue.
Mower worked fine, then I stopped it for a second, started, and then the issue was there.
The first part of the video is me driving backwards (shaky cam) en then I try to go forward and you will see what happens,
Thank you so much for your help.
#2
StarTech
We normally the make and model numbers to even look up the equipment so we are lost without it.
With that said you have a General Transmissions RS800 or RT400 unit which other than external parts and minor are basically unrepairable. To me it looks like a RS800P (with your comment about forward/rev pedal) but the belt config is different than what I seen here.
Now the plastic parts do wear and the inversion rod tension as to be adjusted a little. Also debris is know to cause problems with the brake/clutch pedal not fully returning to home position.
Yes i know, I do not know the model, but thank you very much for the information, for unfortunly I dont think this will help with my problem. I do not understand why there is a second black pulley. I this for the inversion?
I dont understand.
