EZ Steer, steers to right.

[HiYoCheeto]

Have a Craftsman Professional 30" snowthrower, about 3 years old, that has started to pull to the right. I have to continually keep hitting the left release to keep going somewhat straight. It even does this when I tilt the blower back off the scraper and shoes.

My hands and arms get really tired after a 1/2 hour from continually correcting and pushing to the left.

Any ideas? I've checked the tires, scraper and replaced the shoes with plastic ones without success.

 

[D2hornets58]

Have you checked to make sure both tires are actually spinning. I had a similar problem with my snowblower. The pin that goes through the wheel and axle snapped so the axle would not engage the wheel and the wheel would not spin.

 

[HiYoCheeto]

Have checked, both wheels are being driven. Thanks for the suggestion.

 

[indypower500]

check the tire air presures. make sure they both have 10 lbs. I have had snowblowers in my shop with 1 zero air in the tires. snowblowers are not heavy enough to flatten the tire like you would see on a car. 1 tire with sero air will make it pull to that side.

 

[HiYoCheeto]

Yep, tire pressures are okay. Thanks.