D160 carb issue

Bob1197

Forum Newbie
Joined
Jul 6, 2020
Threads
1
Messages
1
So I had taken my D160 to the repair shop to correct an electrical issue that I couldn't find. When I picked it up, it fired up immediately. When I got it to the house, it fired up but was a little slow at it. The next day it cranked but would not fire without ether. I've got fuel into the carb but not out of the carb. I removed and completely cleaned the carb and replaced the gas since it wasn't just real fresh. The results are the same. Every now and then it will fire on it's own but will only run about 5-6 seconds.

It seems that my two options are to rebuild the carb or just replace it.

The carb is a Nikki 795450

Thanks
 
Top