craftsman not running right after new carb

[metz12]

so i got my new carb for my 32cc trimmer today. so i hooked the thing all up and i got it running, but only on half choke. also it was pretty hard to start. i tried setting the idle adjustment but it didnt really do alot. i can also hit the throttle when idling and the rpms get high without the throttle being on. what should i do next? try to mess with the carb screws? thanks in advance.

 

[reynoldston]

so i got my new carb for my 32cc trimmer today. so i hooked the thing all up and i got it running, but only on half choke. also it was pretty hard to start. i tried setting the idle adjustment but it didnt really do alot. i can also hit the throttle when idling and the rpms get high without the throttle being on. what should i do next? try to mess with the carb screws? thanks in advance.

Are you sure you don't have any vacuum leaks?

 

[metz12]

Are you sure you don't have any vacuum leaks?

I dont think so. i was thinking about that too, i think i will mess with the lines tomorrow and see what happens. it might just be that.