Mad Mackie
Lawn Addict
- Joined
- Jul 11, 2011
- Threads
- 50
- Messages
- 1,851
Hi Troops,
My BR600 was loosing power and stalling. Replaced the loose fuel hose from the primer to the carb. This cured the stalling but not the performance. Finally went to the dealer and bought the thickness gauge and a gasket. Did the valve adjustment per the manual and it is back to full power and performance, valves were way out of adjustment. Readjusted the throttle cable in the trigger. Unit was purchased new in fall of 2009. Probably need to the valves in my KM90 trimmer!!:laughing:
My BR600 was loosing power and stalling. Replaced the loose fuel hose from the primer to the carb. This cured the stalling but not the performance. Finally went to the dealer and bought the thickness gauge and a gasket. Did the valve adjustment per the manual and it is back to full power and performance, valves were way out of adjustment. Readjusted the throttle cable in the trigger. Unit was purchased new in fall of 2009. Probably need to the valves in my KM90 trimmer!!:laughing: