Millstone Farm
Member
- Joined
- Aug 30, 2019
- Threads
- 4
- Messages
- 23
My 24hp intek died and would not restart. I found it had an ejected valve guide and a bent pushrod in intake on the #1 head, and it had dropped a pushrod on the intake on the #2 head. I figured that was the problem.
So I installed a new #1 head, installed all the pushrods and they are working fine. But the engine still will not start. I had also installed new plugs, new fuel filter and hoses, new fuel pump, new fuel solenoid, and rebuilt the carburetor. Thanks
So I installed a new #1 head, installed all the pushrods and they are working fine. But the engine still will not start. I had also installed new plugs, new fuel filter and hoses, new fuel pump, new fuel solenoid, and rebuilt the carburetor. Thanks