jbuck0123@embarqmail.com
Member
- Joined
- Aug 17, 2019
- Threads
- 2
- Messages
- 14
I have a MTD Gold RZT54 (54" zero turn) and the drive belt that runs the hydraulic motors has broken and failed. I have purchased a new belt but the new belt conflicts with the hydraulic hose powering the two hydraulic motors. Most u-tube videos showing the similar Cub Cadet do not show these hydraulic lines. No mater how I install the belt it will rub directly on the hydraulic lines. What am I missing here ? Do I need to unhook the hydraulic line ? I have done searches but found nothing.