Stumped !! Kohler Model# CV15S single cylinder .

seppi

Forum Newbie
Joined
Aug 20, 2012
Threads
1
Messages
2
Kohler engine popping and spitting through carb , checked flywheel key ,valve operation , valve seats …….ect Only thing that I haven't checked is timing marks on cam and crankshaft ! Valves are non adjustable , torqued to specs ...new head gaskets ,push rods and hydraulic lifters ! Anyone have any suggestions

Would a faulty ignition module cause these symptoms ??

Stumped Seppi
 

tom3

Lawn Addict
Joined
Apr 9, 2018
Threads
25
Messages
1,579
One thing I'd try is to put each valve in the wide open position and leave it overnight to collapse the lifter for that valve.
 

seppi

Forum Newbie
Joined
Aug 20, 2012
Threads
1
Messages
2
One thing I'd try is to put each valve in the wide open position and leave it overnight to collapse the lifter for that valve.

I'll give it a try Tom but they are new lifters and were collapsed when I installed , also is running the exact same way as with old lifters ! Flames come out the intake when it's trying to start !! Maybe have to remove valve (intake ) and lap the valve ??

thanks seppi
 

tom3

Lawn Addict
Joined
Apr 9, 2018
Threads
25
Messages
1,579
What would happen if the battery is hooked up backwards? I dunno, but check it.
 
Top