Smokeeater
Active Member
- Joined
- Jun 12, 2018
- Threads
- 17
- Messages
- 59
I replaced a starter solonoid cause it wasn't working. After putting new one in it cranked over 2-3 times, but then stopped working again.
What could be the cause of this? Similar to if you kept blowing fuses. I ensured all wires were in same spot as previous and all are tight. I can hear it click but no power to starter side after clunk noise
Thanks
What could be the cause of this? Similar to if you kept blowing fuses. I ensured all wires were in same spot as previous and all are tight. I can hear it click but no power to starter side after clunk noise
Thanks