briggs 24hp only runs with one plug removed

pinevilleoxbow

Forum Newbie
Joined
Aug 4, 2019
Threads
1
Messages
4
guys

looking for thoughts on my situation.
briggs 24hp platinum on a craftsman zero turn

randomly mower quits while cutting. 200hours on it.
i pull it back to the shop and do some quick checks.

determined that if i pull the right plug completely the motor will fire and run on the left cycylinder.
will not runn if the left plug is pulled and right plug is in
done a compression check and have both 150psi
swapped coils for the hell of it.
checked for spark and have spark on both sides.
have changed plugs

right side seems dry.
sprayed some started fluid in it just to try. no difference.
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,123
Remove the valve covers and take a peek...
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,123
You will likely find a loose pushrod.
 

pinevilleoxbow

Forum Newbie
Joined
Aug 4, 2019
Threads
1
Messages
4
baw, you were exactly right!
the bottom push rod was dislodged from the retainer.
i need to find a guide to reinstall. and i guess go buy some feel guages
thanks

You will likely find a loose pushrod.
 

pinevilleoxbow

Forum Newbie
Joined
Aug 4, 2019
Threads
1
Messages
4

PTmowerMech

Lawn Addict
Joined
Apr 16, 2018
Threads
387
Messages
2,956
A tick? The valve cap was still on there when you adjusted it, right?
 
Top