Hello, everyone, I am new to the forum and this is my first post.
Hopefully, you could help me with the following problem.*
I have a Craftsman 1997 hydrostatic Ride-on Mower with a Briggs and Stratton intel engine. The details of the engine are:*
Model 42E707- 63101 and the year is 1997.*
I noticed a small leak in the fuel line and decided to buy and replace the line. The replacement went fine and I decided then to check the other two hoses. Unfortunately, I dislodged one of them and for the life of me, I can not determine where it goes.*
The line from the Petrol tank to the fuel pump is fine and petrol flows if disconnected from the fuel pump and is lower than the petrol tank. When connected there is no fuel getting to the carburettor.*
The line to the crankcase seems fine. The problem I am having is the other line which is on the left if you are facing the front of the mower. I assume that the three lines are:*
1) input from the tank.*
2) Pulse to the crankcase*
3) Fuel Pump to the carburettor. This is the one I can't see where it connects.*
I have photos which I have uploaded.*
I would be so appreciative if anyone could help or have a diagram.*
Hopefully, you could help me with the following problem.*
I have a Craftsman 1997 hydrostatic Ride-on Mower with a Briggs and Stratton intel engine. The details of the engine are:*
Model 42E707- 63101 and the year is 1997.*
I noticed a small leak in the fuel line and decided to buy and replace the line. The replacement went fine and I decided then to check the other two hoses. Unfortunately, I dislodged one of them and for the life of me, I can not determine where it goes.*
The line from the Petrol tank to the fuel pump is fine and petrol flows if disconnected from the fuel pump and is lower than the petrol tank. When connected there is no fuel getting to the carburettor.*
The line to the crankcase seems fine. The problem I am having is the other line which is on the left if you are facing the front of the mower. I assume that the three lines are:*
1) input from the tank.*
2) Pulse to the crankcase*
3) Fuel Pump to the carburettor. This is the one I can't see where it connects.*
I have photos which I have uploaded.*
I would be so appreciative if anyone could help or have a diagram.*